3815 UV LED Lamp
Accessory for Magnetic Particle Testing:
UV lamp complies with risk class 2,
shock-resistant, water-proof

The portable hand lamp for mains and battery operation
A quantum leap for the generation of mobile UV light used for the fluorescent penetrant and magnetic particle inspection: Instead of conventional glow-discharge bulbs, five light-weight and insensitive high-power UV LEDs with more than 10,000 hours operating time are used. The lamp is ready to operate immediately after power-on, provides a high UV intensity and a uniform distribution of intensity. The grading into risk class 2 (according to the German standard EM 6) meets the requirements of working safety for a low UV radiation exposure.
pplication
With nondestructive detection of surface cracks you can use UV-fluorescent agents.
For portable applications hand lamps are used to generate the UV light.

The 5 LEDs of the UV lamp
The new high-power UV LEDs easily can replace conventional glow-discharge lamps in the field of mobile generation of UV light.
This makes it possible to tread new design paths and, simultaneously, to increase cost effectiveness and working quality.
The new LED UV lamp is small, compact, water-proof (IP65) and insensitive to vibrations.
Due to the exceptionally long operating life of the LEDs no change of illuminants usually is required.
The all-aluminium housing is small and handy. The heat dissipation is accomplished without fans via the black-anodized housing.
Thanks to the LED technology no filter glass is required. The strict limitation to UV-A light with a wave length of 365 nm completely excludes danger by UV-B / UV-C radiation, even with defective protection glass.
The total cable length of 4.80 m between mains connector and lamp permits a large radius of action with mains operation.

Mains unit
The large range of operating voltage from 12 to 30 V additionally allows power supply via mobile on-board systems (e.g. in inspection vehicles).
Mains-independent operation
A completely mains independent use is possible by means of the handy, pocket-sized battery pack (154 mm x 96 mm x 33 mm) which allows up to 2.25 hours permanent operation.

Rechargeable battery w/ charger unit
More benefits

Delivery in a robust carrying case with detailed instruction manual and quality test certificate (example image)
The UV hand lamp ...
- provides a high intensity of 65 W/m² approx. and an illuminated field of 120 mm Ø (in each case at a distance of 400 mm).
- complies with all DGZfP requirements in particular regarding the wavelength and intensity.
- connected to the battery can be used for inspection in closed containers and vessels.
- comes in a sturdy carrying case with a detailed instruction manual and quality test certificate.
Technical Data
| Lamp | |
| Weight / Length (incl. handle) | 1.2 kg / 110 mm |
| Wavelength | 365 nm |
| Intensity | 65 W/m² |
| Illuminated field (400 mm distance) | 120 mm Ø |
| Rechargeable battery | |
| Capacity | 2700 mAh / 12 V |
| Housing size (L x W x H) | 154 mm x 96 mm x 33 mm |
| Weight | 375 g |
| Permanent operation | 2.52 hours |
| Charging time | 3.5 hours approx. |
| Ordering Information | |
| UV LED lamp incl. mains unit | 3815.101 |
| Battery pack for UV LED lamp | 3815.120 |
| Charger unit for battery pack | 1808.602 |
更多 3815 UV LED Lamp的详细介绍以及优惠价格请拨打峰志仪器电话021-60491398询问。


